NSN 5306-00-151-1781
Close Tolerance Hex Head Bolt
4.844 inches fastener length, hexagon head style, between 0.265 inches and 0.297 inches head height, width between flats: between 0.740 inches and 0.752 inches .
Manufacturer part number AN178H46 for national stock number 5306001511781.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-151-1781.
-
MPN or Model
AN178H46
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.782 inches -
Fastener Length
4.844 inches -
Head Style
Hexagon -
Head Height
Between 0.265 inches and 0.297 inches -
Width Between Flats
Between 0.740 inches and 0.752 inches -
Hole Diameter
0.070 inches -
Grip Diameter
Between 0.4986 inches and 0.4991 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole -
Thread Diameter
0.500 inches -
Grip Length
4.062 inches -
Hole Quantity
1 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Hole Configuration Style
Hexagon flats -
Distance From Head Largest Bearing Surface To Shank Hole Center
4.671 inches first hole -
Surface Finish
63.0 microinches grip -
Material
Steel comp 8740 or steel comp 8630 or steel comp 8735 or steel comp 4037 or steel comp 4130 or steel comp 4140 -
Material Specification
Mil-s-6049 military specification 1st material response or mil-s-6050 military specification 2nd material response or mil-s-6098 military specification 3rd material response or ams 6300 assn standard 4th material response or mil-s-6758 military specification 5th material response or mil-s-5626 military specification 6th material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-201-5695 MPN AN3102A28-21SZElectrical Receptacle Connector
- 5935-00-201-8052 MPN AN3102C20-7PWElectrical Receptacle Connector
- 5935-00-241-5502 MPN AN3106A36-13SElectrical Plug Connector
- 5935-00-283-2917 MPN AN3102A16-13SElectrical Receptacle Connector
- 5975-00-284-9253 MPN AN3058-12Electrical Conduit Coupling
- 5930-00-320-9124 MPN SX239GPXSwitch Box
- 5935-00-539-0362 MPN AN3108B40-10PElectrical Plug Connector
- 5935-00-148-9287 MPN AN3108B24-12SElectrical Plug Connector
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-151-1781 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN178H46 | Aeronautical Standards Group |