NSN 5306-00-151-1941
Wheel Bolt
1.531 inches fastener length, hexagon head style, 0.156 inches head height, width between flats: 0.438 inches .
Manufacturer part number 84-13 for national stock number 5306001511941.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-151-1941.
-
MPN or Model
84-13
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.469 inches -
Fastener Length
1.531 inches -
Head Style
Hexagon -
Head Height
0.156 inches -
Width Between Flats
0.438 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole -
Thread Diameter
0.250 inches -
Grip Length
0.938 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.250 inches first hole -
Material
Steel -
Surface Treatment
Cadmium and dichromate -
Thread Series Designator
Unf
More from these suppliers
- 5945-00-933-2286 MPN 66C813-2Solid State Relay
- 6110-00-660-8708 MPN 40D8445-2Voltage Regulator Base
- 5905-00-001-7207 MPN MILR39007-11Inductive Wire Wound Fixed Resistor
- 5905-00-004-6027 MPN RBR56L63001BMNoninductive Wire Wound Fixed Resistor
- 5905-00-005-2695 MPN RNR55J2491FMFilm Fixed Resistor
- 5935-00-005-2823 MPN M83723/71R1624NElectrical Receptacle Connector
- 5905-00-006-5498 MPN RNC60H8451BPFilm Fixed Resistor
- 5905-00-007-3838 MPN RLR05C7502GMFilm Fixed Resistor
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-151-1941 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
84-13 | Air Force Standard |
B6812 | Military Specifications |
84-13 | Department Of The Air Force |