NSN 5306-00-151-2426
Close Tolerance Hex Head Bolt
4.781 inches fastener length, hexagon head style, between 0.140 inches and 0.172 inches head height, width between flats: between 0.428 inches and 0.440 inches .
Manufacturer part number AN174H46 for national stock number 5306001512426.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-151-2426.
-
MPN or Model
AN174H46
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.469 inches -
Fastener Length
4.781 inches -
Head Style
Hexagon -
Head Height
Between 0.140 inches and 0.172 inches -
Width Between Flats
Between 0.428 inches and 0.440 inches -
Hole Diameter
0.076 inches -
Grip Diameter
Between 0.2487 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole -
Thread Diameter
0.250 inches -
Grip Length
4.312 inches -
Hole Quantity
1 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Hole Configuration Style
Hexagon flats -
Distance From Head Largest Bearing Surface To Shank Hole Center
4.624 inches first hole -
Surface Finish
63.0 microinches grip -
Material
Steel comp 8740 or steel comp 8630 or steel comp 8735 or steel comp 4037 or steel comp 4140 or steel comp 4130 -
Material Specification
Mil-s-6049 military specification 1st material response or mil-s-6050 military specification 2nd material response or mil-s-6098 military specification 3rd material response or ams 6300 assn standard 4th material response or mil-s-5626 military specification 5th material response or mil-s-6758 military specification 6th material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, ty2 cl 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-005-2861 MPN M83723/87R1005NElectrical Plug Connector
- 5905-00-005-2881 MPN RNC55H53R6FPFilm Fixed Resistor
- 5905-00-005-8932 MPN RNR65H3011FSFilm Fixed Resistor
- 5905-00-006-5497 MPN RNC60H8061FSFilm Fixed Resistor
- 5905-00-007-7242 MPN RBR52L681R0BRWire Wound Fixed Resistor
- 5935-00-008-6909 MPN MILC83723-72Electrical Receptacle Connector
- 5935-00-009-3013 MPN M83723/73R1404NElectrical Receptacle Connector
- 5905-00-009-6524 MPN RNR70H1471FMFilm Fixed Resistor
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-151-2426 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN174H46 | Aeronautical Standards Group |
B6812 | Military Specifications |