NSN 5306-00-151-2465
Wheel Bolt
Between 2.578 inches and 2.625 inches fastener length, hexagon head style, between 0.172 inches and 0.204 inches head height, width between flats: between 0.490 inches and 0.502 inches .
Manufacturer part number AN5C24 for national stock number 5306001512465.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-151-2465.
-
MPN or Model
AN5C24
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.500 inches and 0.578 inches -
Fastener Length
Between 2.578 inches and 2.625 inches -
Head Style
Hexagon -
Head Height
Between 0.172 inches and 0.204 inches -
Width Between Flats
Between 0.490 inches and 0.502 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Thread Diameter
0.312 inches -
Grip Length
Between 2.047 inches and 2.078 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.406 inches first hole and 2.438 inches first hole -
Material
Steel comp 431 -
Material Specification
Mil-s-18732 military specification single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-201-8429 MPN AN3249-2Tip Jack
- 5935-00-244-9850 MPN AN3102A14S4PElectrical Receptacle Connector
- 5935-00-259-7450 MPN AN3108B22-19PElectrical Plug Connector
- 5930-00-265-7156 MPN AN3229-1Switch Guard
- 5905-00-295-3760 MPN AN3155-50-25Nonprecision Wire Wound Variable Resistor
- 5935-01-259-4879 MPN AN3106A28-18SCElectrical Plug Connector
- 5305-00-145-7678 MPN AN500B4-3Machine Screw
- 5305-00-150-9735 MPN AN507-428R30Machine Screw
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-151-2465 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN5C24 | Aeronautical Standards Group |