NSN 5306-00-151-3031
Wheel Bolt
5.281 inches fastener length, hexagon head style, 0.312 inches head height, width between flats: 0.875 inches .
Manufacturer part number AN9-51 for national stock number 5306001513031.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-151-3031.
-
MPN or Model
AN9-51
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.4 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.906 inches -
Fastener Length
5.281 inches -
Head Style
Hexagon -
Head Height
0.312 inches -
Width Between Flats
0.875 inches -
Shank Unthreaded Hole Diameter
0.141 inches first hole -
Thread Diameter
0.562 inches -
Grip Length
4.375 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
5.031 inches first hole -
Material
Steel -
Surface Treatment
Cadmium and dichromate -
Thread Series Designator
Unf
More from these suppliers
- 5905-00-004-6037 MPN MILR39005-6Noninductive Wire Wound Fixed Resistor
- 5905-00-004-6052 MPN RE60G1240Inductive Wire Wound Fixed Resistor
- 5905-00-009-4493 MPN RN75E1210BFilm Fixed Resistor
- 5935-00-009-6388 MPN MILC83723-75Electrical Plug Connector
- 5935-00-009-6394 MPN M83723/76R16247Electrical Plug Connector
- 5905-00-009-6475 MPN RER75F32R4RInductive Wire Wound Fixed Resistor
- 5905-00-024-0371 MPN RBR53L28000BRNoninductive Wire Wound Fixed Resistor
- 5930-00-054-0192 MPN MIL-S-83731Toggle Switch
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-151-3031 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN9-51 | Aeronautical Standards Group |
B6812 | Military Specifications |