NSN 5306-00-151-5761
Coaxial Connector
Between 5.422 inches and 5.452 inches fastener length, double hexagon w/hole head style, 1.243 inches head height, width between flats: between 1.427 inches and 1.440 inches .
Manufacturer part number VS2003F18-56 for national stock number 5306001515761.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-151-5761.
-
MPN or Model
VS2003F18-56
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
2.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 1.912 inches and 1.962 inches -
Fastener Length
Between 5.422 inches and 5.452 inches -
Head Style
Double hexagon w/hole -
Head Height
1.243 inches -
Width Between Flats
Between 1.427 inches and 1.440 inches -
Extended Washer Diameter
Between 2.090 inches and 2.100 inches -
Extended Washer Thickness
0.280 inches -
Grip Diameter
Between 1.1225 inches and 1.1240 inches -
Thread Diameter
1.125 inches -
Grip Length
Between 3.490 inches and 3.510 inches -
Thready Qty Per Inch (tpi)
12 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Material
Steel or steel comp h11 -
Material Specification
Sps-m-107 fscm 56878 mfr ref 1st material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-413-9021 MPN VCL0009-7-35Close Tolerance Screw
- 5305-01-435-3774 MPN BACB30LU7-31Close Tolerance Screw
- 5305-01-440-4576 MPN 3M1169V4-16Close Tolerance Screw
- 5306-00-292-7047 MPN VAL23001-8D39Shear Bolt
- 5306-01-025-6959 MPN VAL23029-4-3Close Tolerance Bolt
- 5306-01-046-8487 MPN 3028T68P01Tee Head Bolt
- 5306-01-054-3419 MPN VCG0009L6-13Shear Bolt
- 5306-01-054-3424 MPN C7521L6-9Shear Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-151-5761 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VS2003F18-56 | Arconic Global Fasteners & Rings, |
GB511H18-56 | Northrop Grumman Systems Corporation |
EWB22-18-56 | Sps Technologies, Llc |
EWB22-18-56 | Sps Technologies, Llc |
GB511GF18-56 | Sps Technologies, Llc |
GB511GF18-56 | Valley-todeco, Inc. |
GB511GF18-56 | Sps Technologies, Llc |
GB511GF18-56 | Sps Technologies, Llc |
VS2003F18-56 | Alcoa Global Fasteners, Inc. |