NSN 5306-00-151-6179
Close Tolerance Hex Head Bolt
Between 1.460 inches and 1.507 inches fastener length, double hexagon head style, 0.187 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number 68484-5-018 for national stock number 5306001516179.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-151-6179.
-
MPN or Model
68484-5-018
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.325 inches and 0.392 inches -
Fastener Length
Between 1.460 inches and 1.507 inches -
Head Style
Double hexagon -
Head Height
0.187 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Thread Diameter
0.312 inches -
Grip Length
Between 0.115 inches and 0.135 inches -
Thready Qty Per Inch (tpi)
24 -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.341 inches first hole and 1.373 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Steel -
Material Specification
H-11, sts bs000, fscm 98897 mfr ref single material response -
Surface Treatment
Nickel and cadmium and chromate -
Surface Treatment Specification
Sts bs 000, lockheed-georgia co mfr ref all treatment responses -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-138-7235 MPN ST3M454-7L25Close Tolerance Screw
- 5305-01-365-0406 MPN BACB30LR3-23Close Tolerance Screw
- 5305-01-501-4784 MPN 3M1170C3-26AClose Tolerance Screw
- 5306-00-205-3700 MPN BACB30MF6-18Close Tolerance Bolt
- 5306-01-056-5442 MPN BACB30LM4-15Shear Bolt
- 5306-01-132-1059 MPN ST3M747-5-14Close Tolerance Bolt
- 5306-01-143-6511 MPN VAL23608-5-32Shoulder Bolt
- 5306-01-160-6829 MPN BACB30NE4-15Close Tolerance Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-151-6179 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
68484-5-018 | Sps Technologies, Llc |
VAL23611-5DS028 | Valley-todeco, Inc. |
AIC2263A05D028 | Sps Technologies, Llc |
PBF1041A5D028 | Sps Technologies, Llc |
68484-5-18 | Sps Technologies, Llc |
68484-5-018 | Sps Technologies, Llc |
VS2978A05D018 | Arconic Global Fasteners & Rings, |
BM3200-5A028D | Huck International, Inc. |
11797A05D018 | Reid Products Inc. |
STSBG000A05D018 | Lockheed Martin Corporation |
BM3200-5A028D | Huck Intl Inc |
VS2978A05D018 | Alcoa Global Fasteners, Inc. |