NSN 5306-00-152-1003
Stripper Bolt
3.047 inches fastener length, hexagon head style, 0.468 inches head height, width between flats: between 1.240 inches and 1.253 inches .
Manufacturer part number 94088 for national stock number 5306001521003.
Datasheet
-
Product description
Shoulder Bolt NSN 5306-00-152-1003.
-
MPN or Model
94088
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.204 inches -
Fastener Length
3.047 inches -
Head Style
Hexagon -
Head Height
0.468 inches -
Width Between Flats
Between 1.240 inches and 1.253 inches -
Shoulder Diameter
0.998 inches first shoulder and 0.999 inches first shoulder -
Shoulder Length
1.843 inches first shoulder -
Shank Unthreaded Hole Diameter
0.141 inches first hole -
Thread Diameter
0.875 inches -
Thready Qty Per Inch (tpi)
14 -
Min. Tensile Strength (psi)
150000 pounds per square inch -
Hardness Rating
33.0 rockwell c and 37.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.749 inches first hole -
Shoulder Shape
Round first shoulder -
Material
Steel comp e4340 -
Material Specification
Mil-s-5000 military specification single material response -
Surface Treatment
Cadmium -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-001-7346 MPN GA800MLA24-8Electrical Connector Backshell
- 1560-00-037-1456 MPN 89PM1431-1Fitting
- 1680-00-082-7630 MPN 128SCAM100-97Flap Dr1 Shaft Assy
- 1560-00-091-3168 MPN 89P1228-1Aircraft Fitting Assembly
- 1560-00-103-0579 MPN 123AB40098-1Weld Cylinder Assy
- 1680-00-151-4408 MPN 89P1146-19Bell Crank
- 1560-00-165-7650 MPN 87844-1Aircraft Channel
- 1560-00-169-7891 MPN 123BM10420-511Fairing Right Hand Fitting
An externally threaded fastener whose threaded portion is of one nominal diameter, no. 10 (0.190 in.) (5 mm) or larger. It has a round unthreaded neck or shank all or part of which is of greater diameter than the threaded portion. The head is not designed to be held or driven with an inserted drivers. A locking feature may be incorporated in the design of the head or threads. For items with a thread diameter smaller than no. 10 (0.190 in.) (5 mm) and those items with an inserted drive head, use screw, shoulder. For items which are no. 10 (0.190 in.) (5 mm) or larger in size and are both shouldered and have an externally relieved body, use bolt, externally relieved body. Excludes thumbscrew.
Pricing and Availability
Get a quote for 5306-00-152-1003 shoulder boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
94088 | Northrop Grumman Systems Corporation |