NSN 5306-00-152-2001
Wheel Bolt
5.000 inches fastener length, hexagon head style, between 0.348 inches and 0.371 inches head height, width between flats: between 0.982 inches and 1.000 inches .
Manufacturer part number 11641025 for national stock number 5306001522001.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-152-2001.
-
MPN or Model
11641025
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
4.820 inches -
Fastener Length
5.000 inches -
Head Style
Hexagon -
Head Height
Between 0.348 inches and 0.371 inches -
Width Between Flats
Between 0.982 inches and 1.000 inches -
Thread Diameter
0.562 inches -
Grip Length
0.180 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
12 -
Hardness Rating
23.0 rockwell c and 32.0 rockwell c -
Material
Steel comp 1038 or steel comp 1541 -
Material Specification
Astm a576 assn standard all material responses -
Surface Treatment
Zinc -
Surface Treatment Specification
Qq-z-325, type 2, cl 3 federal specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5935-00-068-2562 MPN 11639331Electrical Receptacle Connector
- 5905-00-279-4316 MPN 7375714Composition Fixed Resistor
- 4820-00-332-0083 MPN 7973651Shuttle Valve
- 5975-00-405-1928 MPN 10937531Electrical Conduit
- 4820-00-441-4876 MPN 8743036Check Valve
- 5940-00-735-5520 MPN 7355520Lug Terminal
- 5935-00-772-2238 MPN 7722238Electrical Connector Cable Clamp
- 5975-01-039-8372 MPN 12257222Dust And Moisture Seal Boot
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-152-2001 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
11641025 | U S Army Tank Automotive Command |