NSN 5306-00-152-5284
Wheel Bolt
Between 1.640 inches and 1.687 inches fastener length, hexagon head style, between 0.390 inches and 0.422 inches head height, width between flats: between 1.053 inches and 1.066 inches .
Manufacturer part number AN12C14A for national stock number 5306001525284.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-152-5284.
-
MPN or Model
AN12C14A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 1.062 inches and 1.141 inches -
Fastener Length
Between 1.640 inches and 1.687 inches -
Head Style
Hexagon -
Head Height
Between 0.390 inches and 0.422 inches -
Width Between Flats
Between 1.053 inches and 1.066 inches -
Thread Diameter
0.750 inches -
Grip Length
Between 0.546 inches and 0.578 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Material
Steel comp 431 -
Material Specification
Mil-s-18732 military specification single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-280-2083 MPN AN3102A18-19SElectrical Receptacle Connector
- 5975-00-280-3660 MPN AN3053Electrical Conduit Ferrule
- 4820-00-289-4141 MPN AN6279-8CDSafety Relief Valve
- 4820-00-433-3827 MPN AN6249-5Check Valve
- 5930-00-548-5051 MPN AN3227-8Toggle Switch
- 5935-00-170-3060 MPN AN3106A16-2PElectrical Plug Connector
- 5935-00-148-9311 MPN AN3108B24-9PElectrical Plug Connector
- 5305-00-052-6562 MPN AN501AD10-6Machine Screw
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-152-5284 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN12C14A | Aeronautical Standards Group |