NSN 5306-00-152-5509
Close Tolerance Hex Head Bolt
Between 2.045 inches and 2.092 inches fastener length, double hexagon head style, 0.281 inches head height, width between flats: between 0.741 inches and 0.752 inches .
Manufacturer part number 95229-8-024 for national stock number 5306001525509.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-152-5509.
-
MPN or Model
95229-8-024
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.545 inches and 0.592 inches -
Fastener Length
Between 2.045 inches and 2.092 inches -
Head Style
Double hexagon -
Head Height
0.281 inches -
Width Between Flats
Between 0.741 inches and 0.752 inches -
Grip Diameter
Between 0.4985 inches and 0.4995 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole -
Thread Diameter
0.500 inches -
Grip Length
1.500 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
156000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.905 inches first hole and 1.937 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Steel -
Material Specification
H-11 stsbs00119887 mfr ref single material response -
Surface Treatment
Cadmium and chromate -
Thread Series Designator
Unf
More from these suppliers
- 5305-01-056-3205 MPN BACB30LU5-7Close Tolerance Screw
- 5305-01-160-7561 MPN ST3M557-5-18Close Tolerance Screw
- 5305-01-202-8979 MPN BACB30LK3-7Close Tolerance Screw
- 5305-01-413-7374 MPN GB510FG4-29Close Tolerance Screw
- 5305-01-623-9302 MPN VT10021-3-17Close Tolerance Screw
- 5306-00-205-3700 MPN BACB30NE6-18Close Tolerance Bolt
- 5306-01-350-2243 MPN VCD0020-7-10AShear Bolt
- 5306-01-350-2902 MPN VCD0020-20D36AShear Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-152-5509 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
95229-8-024 | Sps Technologies, Llc |
11701A08D024 | Reid Products Inc. |
VAL23602-8DS024 | Valley-todeco, Inc. |
AIC2264A08D024 | Sps Technologies, Llc |
PBF1042A8D024 | Sps Technologies, Llc |
68485-8-024 | Sps Technologies, Llc |
68485-8-024 | Sps Technologies, Llc |
VS2979A08D024 | Arconic Global Fasteners & Rings, |
BM3210-8A024D | Huck International, Inc. |
STSBG001A08D024 | B & B Specialties Inc. |
STSBG001A08D024 | Sonic Industries Inc. |
STSBG001A08D024 | Sps Technologies, Llc |
STSBG001A08D024 | Reid Products Inc. |
STSBG001A08D024 | Lockheed Martin Corporation |
BM3210-8A024D | Huck Intl Inc |
VS2979A08D024 | Alcoa Global Fasteners, Inc. |
STSBG001A08D024 | Maclean Sky, L.l.c. |
STSBG001A08D024 | Houston Precision Fasteners I, Lp |