NSN 5306-00-156-2330
Wheel Bolt
Between 1.141 inches and 1.188 inches fastener length, hexagon head style, between 0.109 inches and 0.141 inches head height, width between flats: between 0.365 inches and 0.377 inches .
Manufacturer part number AN3C11A for national stock number 5306001562330.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-156-2330.
-
MPN or Model
AN3C11A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.374 inches and 0.453 inches -
Fastener Length
Between 1.141 inches and 1.188 inches -
Head Style
Hexagon -
Head Height
Between 0.109 inches and 0.141 inches -
Width Between Flats
Between 0.365 inches and 0.377 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.734 inches and 0.766 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Material
Steel comp 431 -
Material Specification
Mil-s-18732 military specification single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-241-0257 MPN AN3106-24-15PElectrical Plug Connector
- 5935-00-280-2354 MPN 3057-20Electrical Connector Cable Clamp
- 5905-00-283-5847 MPN AN3155-50-100Nonprecision Wire Wound Variable Resistor
- 5975-01-551-7582 MPN AN3068-6Electrical Conduit Coupling
- 5305-00-081-7734 MPN AN505UB6-9Machine Screw
- 5305-00-150-9132 MPN AN510-4R6Machine Screw
- 5305-00-150-9147 MPN AN501-10-24Machine Screw
- 5305-00-151-0252 MPN AN507-1032R12Machine Screw
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-156-2330 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN3C11A | Aeronautical Standards Group |
932.19.60.031 | Pilatus Aircraft Ltd |
21666-00703 | Leonardo Mw Ltd |
5306PL0964344 | Inspektorat Wsparcia Sil Zbrojnych |