NSN 5306-00-156-2469
Close Tolerance Hex Head Bolt
Between 1.640 inches and 1.687 inches fastener length, hexagon head style, between 0.109 inches and 0.141 inches head height, width between flats: between 0.365 inches and 0.377 inches .
Manufacturer part number AN173H15A for national stock number 5306001562469.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-156-2469.
-
MPN or Model
AN173H15A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.374 inches and 0.453 inches -
Fastener Length
Between 1.640 inches and 1.687 inches -
Head Style
Hexagon -
Head Height
Between 0.109 inches and 0.141 inches -
Width Between Flats
Between 0.365 inches and 0.377 inches -
Hole Diameter
0.046 inches -
Grip Diameter
Between 0.1889 inches and 0.1894 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 1.234 inches and 1.266 inches -
Hole Quantity
1 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Hole Configuration Style
Hexagon flats -
Material
Steel comp 4130 or steel comp 8740 or steel comp 8630 or steel comp 8735 or steel comp 4140 or steel comp 4037 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5905-00-295-3017 MPN 50B13966Inductive Wire Wound Fixed Resistor
- 4920-00-490-2431 MPN 42B5604-2Head Assy
- 5985-00-538-7464 MPN 56C13200Antenna
- 5975-00-563-1501 MPN 50F13904Electrical Equipment Mounting Base
- 5306-00-150-9302 MPN 60-8-14Machine Bolt
- 5905-00-001-5836 MPN MILR55182-3Film Fixed Resistor
- 5905-00-004-6052 MPN RER60F1240MInductive Wire Wound Fixed Resistor
- 5935-00-005-2826 MPN MILC83723-72Electrical Receptacle Connector
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-156-2469 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN173H15A | Aeronautical Standards Group |
B6812 | Military Specifications |
83H15 | Department Of The Air Force |