NSN 5306-00-156-2480
Wheel Bolt
Between 2.781 inches and 2.812 inches fastener length, hexagon head style, between 0.266 inches and 0.297 inches head height, width between flats: between 0.554 inches and 0.564 inches .
Manufacturer part number AN76-26 for national stock number 5306001562480.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-156-2480.
-
MPN or Model
AN76-26
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.640 inches and 0.719 inches -
Fastener Length
Between 2.781 inches and 2.812 inches -
Head Style
Hexagon -
Head Height
Between 0.266 inches and 0.297 inches -
Width Between Flats
Between 0.554 inches and 0.564 inches -
Thread Diameter
0.375 inches -
Grip Length
Between 2.109 inches and 2.141 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Material
Steel comp 4140 or steel comp 8740 or steel comp 8630 or steel comp 8735 or steel comp 4130 or steel comp 4037 -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-665-4937 MPN AN3107A16S8PElectrical Plug Connector
- 5940-01-200-6999 MPN AN3436-2-9Terminal Board
- 5305-00-144-3740 MPN AN520-8R16Machine Screw
- 5305-00-145-7676 MPN AN500B4-5Machine Screw
- 5305-00-151-1230 MPN AN515-6R7Machine Screw
- 5305-00-151-2235 MPN AN526-1032R10Machine Screw
- 5305-00-151-3763 MPN AN515DD6-14Machine Screw
- 5305-00-156-2872 MPN AN505-8R7Machine Screw
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-156-2480 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN76-26 | Aeronautical Standards Group |