NSN 5306-00-156-2481
Wheel Bolt
Between 2.656 inches and 2.703 inches fastener length, hexagon head style, between 0.266 inches and 0.297 inches head height, width between flats: between 0.554 inches and 0.564 inches .
Manufacturer part number MS20073-06-25 for national stock number 5306001562481.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-156-2481.
-
MPN or Model
MS20073-06-25
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Length
Between 0.640 inches and 0.719 inches -
Fastener Length
Between 2.656 inches and 2.703 inches -
Head Style
Hexagon -
Head Height
Between 0.266 inches and 0.297 inches -
Width Between Flats
Between 0.554 inches and 0.564 inches -
Thread Diameter
0.375 inches -
Grip Length
Between 1.984 inches and 2.016 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Material
Steel comp 4140 or steel comp 8740 or steel comp 8630 or steel comp 8735 or steel comp 4130 or steel comp 4037 -
Thread Series Designator
Unf
More from these suppliers
- 5306-00-326-6652 MPN 137029Crankcase Fron Bolt
- 5306-00-558-4558 MPN 63D73Machine Bolt
- 5306-00-601-5012 MPN 229361Shoulder Bolt
- 6105-00-617-1480 MPN 14-97862-02Direct Current Motor
- 6105-00-635-0766 MPN D12364Direct Current Motor
- 5950-00-080-8699 MPN MS75008-14Radio Frequency Coil
- 5935-00-087-8436 MPN MS3107A14S6SCElectrical Plug Connector
- 5930-00-114-9940 MPN MS25100-26Toggle Switch
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-156-2481 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS20073-06-25 | Military Standards |
82D6 | Curtiss-wright Controls, Inc |