NSN 5306-00-161-1582
Wheel Bolt
Between 1.688 inches and 1.750 inches fastener length, hexagon head style, between 0.250 inches and 0.260 inches head height, width between flats: between 0.551 inches and 0.562 inches .
Manufacturer part number MS35763-837 for national stock number 5306001611582.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-161-1582.
-
MPN or Model
MS35763-837
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 1.000 inches and 1.188 inches -
Fastener Length
Between 1.688 inches and 1.750 inches -
Head Style
Hexagon -
Head Height
Between 0.250 inches and 0.260 inches -
Width Between Flats
Between 0.551 inches and 0.562 inches -
Locking Feature
Distortions bearing surface of head -
Thread Diameter
0.375 inches -
Grip Length
0.156 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
120000 pounds per square inch -
Hardness Rating
25.0 rockwell c and 34.0 rockwell c -
Material
Steel -
Material Specification
Sae gr 5 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5940-00-082-4665 MPN MS27249-1B3Terminal Board
- 5930-00-103-7715 MPN MS25026-1Sensitive Switch
- 5935-00-162-8651 MPN MS27473T16B26SBElectrical Plug Connector
- 5935-00-171-0133 MPN MS27473T24B35SAElectrical Plug Connector
- 5905-00-174-2710 MPN MS35048-39Wire Wound Fixed Resistor
- 5935-00-192-1499 MPN MS3101A28-17SElectrical Plug Connector
- 5905-00-195-6796 MPN MS35045-202Composition Fixed Resistor
- 5935-00-196-2210 MPN MS3106A20-6SElectrical Plug Connector
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-161-1582 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS35763-837 | Military Standards |
MS35763-837 | Military Standards |
MS35763-837 | Military Standards |
MS35763-837 | Military Standards |