NSN 5306-00-161-9266
Coaxial Connector
Between 0.5895 inches and 0.6365 inches fastener length, double hexagon head style, 0.164 inches head height, width between flats: between 0.410 inches and 0.439 inches .
Manufacturer part number 68744-4-5 for national stock number 5306001619266.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-161-9266.
-
MPN or Model
68744-4-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.293 inches -
Fastener Length
Between 0.5895 inches and 0.6365 inches -
Head Style
Double hexagon -
Head Height
0.164 inches -
Width Between Flats
Between 0.410 inches and 0.439 inches -
Grip Diameter
Between 0.4380 inches and 0.4540 inches -
Single Shear Strength
132000 pounds per square inch -
Thread Diameter
0.250 inches -
Grip Length
0.3125 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Material
Steel comp h11 -
Material Specification
Ams 6485 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 627 national specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-067-7811 MPN SFH22D6A18Machine Screw
- 5305-00-225-9874 MPN SFH22D6A12Machine Screw
- 5305-00-340-2873 MPN LS15234MC3-7Close Tolerance Screw
- 5305-00-464-2620 MPN NAS1012-14AHexagon Head Cap Screw
- 5305-00-754-2071 MPN NAS1203-9WClose Tolerance Screw
- 5305-00-848-9420 MPN SD300-65737Socket Head Cap Screw
- 5305-00-889-6866 MPN NAS1204-36Close Tolerance Screw
- 5305-00-937-4652 MPN NAS1102-06-26Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-161-9266 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
68744-4-5 | Sps Technologies, Llc |