NSN 5306-00-161-9305
Wheel Bolt
Between 0.891 inches and 0.937 inches fastener length, hexagon head style, between 0.172 inches and 0.204 inches head height, width between flats: between 0.490 inches and 0.502 inches .
Manufacturer part number MS21095-5006 for national stock number 5306001619305.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-161-9305.
-
MPN or Model
MS21095-5006
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.506 inches and 0.572 inches -
Fastener Length
Between 0.891 inches and 0.937 inches -
Head Style
Hexagon -
Head Height
Between 0.172 inches and 0.204 inches -
Width Between Flats
Between 0.490 inches and 0.502 inches -
End Application
Spec item -
Thread Diameter
0.312 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Material
Steel comp 431 -
Material Specification
Mil-s-18732 military specification single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-031-4549 MPN MS3106F16S-5PElectrical Plug Connector
- 5950-00-031-4560 MPN MS75084-16Radio Frequency Coil
- 5935-00-052-2078 MPN MS3100R28-18PElectrical Receptacle Connector
- 5935-00-149-3535 MPN UG309UConnector Adapter
- 5935-00-169-3781 MPN MS3127E20-16PWElectrical Receptacle Connector
- 5935-00-189-2513 MPN MS27511A16CElectrical Connector Cover
- 5935-00-189-3176 MPN MS27473E14A35SElectrical Plug Connector
- 5905-00-195-6449 MPN MS35045-17Composition Fixed Resistor
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-161-9305 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21095-5006 | Military Standards |
LK21095-5006 | Torkon Fastener Corp |
MS21095-5006 | Military Standards |