NSN 5306-00-163-6575
Coaxial Connector
Between 0.722 inches and 0.725 inches fastener length, dished hexagon head style, between 0.125 inches and 0.140 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number NAS6704U5 for national stock number 5306001636575.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-163-6575.
-
MPN or Model
NAS6704U5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.400 inches and 0.450 inches -
Fastener Length
Between 0.722 inches and 0.725 inches -
Head Style
Dished hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.302 inches and 0.322 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel -
Material Specification
Ams5731 assn standard single material response or ams 5737 assn standard single material response -
Thread Series Designator
Unjf -
Specification Data
80205-nas6704 professional/industrial association standard
More from these suppliers
- 5935-00-111-1891 MPN NAS1665-14Electrical Connector Backshell
- 5305-00-007-9881 MPN NAS1100E04-7PMachine Screw
- 5305-00-051-8606 MPN MS16995-94Socket Head Cap Screw
- 5305-00-052-7407 MPN MS24627-14Tapping Screw
- 5305-00-138-9866 MPN NAS1351-4LB12PSocket Head Cap Screw
- 5305-00-150-3268 MPN MS24673-20Socket Head Cap Screw
- 5305-00-163-2686 MPN NAS1133-28Close Tolerance Screw
- 5305-00-225-8470 MPN MS24693-S138Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-163-6575 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6704U5 | National Aerospace Standards |
10114191 | Nimikkeistokeskus Ncb Finland |
Stock Check
- NE: 23994
- NS: 1034
- SV: 1