NSN 5306-00-165-2185
Close Tolerance Hex Head Bolt
Between 1.200 inches and 1.247 inches fastener length, double hexagon head style, 0.257 inches head height, width between flats: between 0.678 inches and 0.689 inches .
Manufacturer part number 68484-7-012 for national stock number 5306001652185.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-165-2185.
-
MPN or Model
68484-7-012
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.450 inches and 0.497 inches -
Fastener Length
Between 1.200 inches and 1.247 inches -
Head Style
Double hexagon -
Head Height
0.257 inches -
Width Between Flats
Between 0.678 inches and 0.689 inches -
Grip Diameter
Between 0.4360 inches and 0.4370 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole -
Thread Diameter
0.438 inches -
Grip Length
0.750 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
132000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.075 inches first hole and 1.107 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Nickel and cadmium and chromate -
Surface Treatment Specification
Sts bs 000, lockheed-georgia co mfr ref all treatment responses -
Thread Series Designator
Unjf
More from these suppliers
- 1560-01-571-8180 MPN 95972-5-6 Aircraft Index Pin
- 5305-00-005-5927 MPN NAS1131-12Close Tolerance Screw
- 5305-00-136-7809 MPN 54291-3-8Close Tolerance Screw
- 5305-00-152-0991 MPN NAS1101E08-16Machine Screw
- 5305-00-177-5759 MPN 330-1716-310Socket Head Cap Screw
- 5305-00-194-6903 MPN SFT930-5-27Close Tolerance Screw
- 5305-00-369-1710 MPN 54291-4-7Close Tolerance Screw
- 5305-00-406-5225 MPN NAS1102-06-48Machine Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-165-2185 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
68484-7-012 | Sps Technologies, Llc |
11797A07D012 | Reid Products Inc. |
STSBG000A07D012 | Lockheed Martin Corporation |
68484-7-012 | Sps Technologies, Llc |