NSN 5306-00-165-8040
Wheel Bolt
0.625 inches fastener length, hexagon head style, between 0.150 inches and 0.163 inches head height, width between flats: between 0.428 inches and 0.438 inches .
Manufacturer part number 2585163-5 for national stock number 5306001658040.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-165-8040.
-
MPN or Model
2585163-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.525 inches and 0.625 inches -
Fastener Length
0.625 inches -
Head Style
Hexagon -
Head Height
Between 0.150 inches and 0.163 inches -
Width Between Flats
Between 0.428 inches and 0.438 inches -
Thread Diameter
0.250 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
20 -
Hardness Rating
23.0 rockwell c and 32.0 rockwell c -
Material
Steel -
Material Specification
Sae gr 5 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5940-00-503-8207 MPN 76117Terminal Board
- 5905-00-577-0581 MPN 8597263-364Film Fixed Resistor
- 4920-00-862-5717 MPN 6799370Filter Parts Kit
- 5905-00-989-5410 MPN 7926000-752Composition Fixed Resistor
- 6110-00-695-8877 MPN 1926691Voltage Regulator Disk
- 5305-00-010-4475 MPN 104475Wood Screw
- 5305-00-014-1021 MPN 141021Setscrew
- 5305-00-042-1377 MPN 421377Machine Screw
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-165-8040 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
2585163-5 | Naval Ship Systems Command |
2585163-5 | Fnss Savunma Sistemleri A.s. |
9420597 | General Motors Corp |
2585163-5 | Goriziane Group Spa |
10393111 | Nimikkeistokeskus Ncb Finland |