NSN 5306-00-167-3669
Wheel Bolt
3.219 inches fastener length, hexagon head style, between 0.172 inches and 0.204 inches head height, width between flats: between 0.490 inches and 0.502 inches .
Manufacturer part number AN5C31 for national stock number 5306001673669.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-167-3669.
-
MPN or Model
AN5C31
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.531 inches -
Fastener Length
3.219 inches -
Head Style
Hexagon -
Head Height
Between 0.172 inches and 0.204 inches -
Width Between Flats
Between 0.490 inches and 0.502 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole -
Thread Diameter
0.312 inches -
Grip Length
2.688 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
3.047 inches first hole -
Material
Stainless steel -
Material Specification
Qq-s-770 federal specification single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-201-7271 MPN AN3101E22-14SElectrical Plug Connector
- 5935-00-236-0972 MPN AN3102A20-29SElectrical Receptacle Connector
- 5975-00-242-6427 MPN AN3055-14-4Electrical Conduit Adapter
- 5935-00-280-1928 MPN AN3102A24-10SElectrical Receptacle Connector
- 5935-00-280-2459 MPN AN3106B24-9SElectrical Plug Connector
- 5935-00-539-2659 MPN AN3106A14S5SCElectrical Plug Connector
- 5905-00-549-3994 MPN AN3155-25-25Nonprecision Wire Wound Variable Resistor
- 5935-00-552-6559 MPN AN3108B28-12SXElectrical Plug Connector
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-167-3669 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN5C31 | Aeronautical Standards Group |