NSN 5306-00-173-8953
Wheel Bolt
Between 0.615 inches and 0.635 inches fastener length, double hexagon w/hole head style, between 0.250 inches and 0.270 inches head height, width between flats: between 0.243 inches and 0.251 inches .
Manufacturer part number 654243 for national stock number 5306001738953.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-173-8953.
-
MPN or Model
654243
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.553 inches and 0.635 inches -
Fastener Length
Between 0.615 inches and 0.635 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.250 inches and 0.270 inches -
Width Between Flats
Between 0.243 inches and 0.251 inches -
Extended Washer Diameter
Between 0.365 inches and 0.385 inches -
Extended Washer Thickness
Between 0.040 inches and 0.050 inches -
Thread Diameter
0.190 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
32 -
Hardness Rating
30.0 rockwell c and 38.0 rockwell c -
Material
Steel comp 601 -
Material Specification
Ams 6304 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Ams 2416 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 4920-00-005-1379 MPN PWA50684Aircraft Engine Maintenance Fixture
- 4920-00-007-3392 MPN PWA30749Turbine Outer Air Se Sizing Ring
- 4920-00-140-5099 MPN PWA31078Interface Device Adapter Assembly
- 4920-00-142-6577 MPN PWA2779Aircraft Maintenance Fixture
- 4920-00-486-8458 MPN PWA51808Air Seal Protector
- 4920-00-816-8926 MPN PWA16691Thermocoupl Die Set
- 4920-00-948-4317 MPN PWA21996Front Compr Thimble
- 4920-01-059-5101 MPN PWA53645-1Pulley Assembly Guide
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-173-8953 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
654243 | United Technologies Corporation |