NSN 5306-00-174-4113
Close Tolerance Hex Head Bolt
1.406 inches fastener length, between 0.140 inches and 0.172 inches head height, 0.076 inches first hole shank unthreaded hole diameter, min. tensile strength (psi): 125000 pounds per square inch.
Manufacturer part number AN174H13 for national stock number 5306001744113.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-174-4113.
-
MPN or Model
AN174H13
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
2.4 lb -
Thread Class
3a -
Thread Length
0.468 inches -
Fastener Length
1.406 inches -
Head Height
Between 0.140 inches and 0.172 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Material
Steel comp 8740 or steel comp 8630 or steel comp 8735 or steel comp 4140 or steel comp 4130 or steel comp 4037 -
Material Specification
Mil-s-6049 military specification 1st material response or mil-s-6050 military specification 2nd material response or mil-s-6098 military specification 3rd material response or mil-s-5626 military specification 4th material response or mil-s-6758 military specification 5th material response or ams 6300 assn standard 6th material response
More from these suppliers
- 5985-00-093-5684 MPN AS287APS31Antenna Asy
- 5935-00-201-3263 MPN AN3102E24-21PElectrical Receptacle Connector
- 5975-00-497-1926 MPN AN3050-16Electrical Conduit Ferrule
- 5935-00-578-2329 MPN AN3106E28-14SElectrical Plug Connector
- 5975-00-646-4738 MPN AN3055-36-24Electrical Conduit Adapter
- 5940-00-681-9713 MPN AN659-4Lug Terminal
- 5305-00-069-2576 MPN AN116963Machine Screw
- 5305-00-150-9770 MPN AN505-6-16Machine Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-174-4113 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN174H13 | Aeronautical Standards Group |