NSN 5306-00-174-8628
Wheel Bolt
0.625 inches fastener length, double hexagon w/hole head style, 0.258 inches head height, width between flats: 0.250 inches .
Manufacturer part number MS9750-08 for national stock number 5306001748628.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-174-8628.
-
MPN or Model
MS9750-08
-
Schedule B
8108.90.8000 (Other wrought titanium, nesoi) -
NMF (National Motor Freight)
136500 - Metal NOI/metal Alloys NOI -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.533 inches and 0.553 inches -
Fastener Length
0.625 inches -
Head Style
Double hexagon w/hole -
Head Height
0.258 inches -
Width Between Flats
0.250 inches -
Extended Washer Diameter
0.375 inches -
Extended Washer Thickness
0.040 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.072 inches and 0.092 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 42.0 rockwell c -
Surface Finish
32.0 microinches threads -
Material
Titanium alloy -
Material Specification
Ams 4967 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5950-00-035-4419 MPN MS75083-07Radio Frequency Coil
- 5930-00-050-2629 MPN 25098-3Toggle Switch
- 5935-00-051-7911 MPN MS3100K28-22PElectrical Receptacle Connector
- 5935-00-058-1127 MPN MS3132H3C50PElectrical Receptacle Connector
- 5940-00-082-4662 MPN MS27249-3B3Terminal Board
- 5935-00-090-7055 MPN MS3152R24Electrical Connector Cable Clamp
- 5935-00-175-4421 MPN MS27473E14B18SElectrical Plug Connector
- 5905-00-195-6756 MPN MS35045-214Composition Fixed Resistor
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-174-8628 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS9750-08 | Military Standards |