NSN 5306-00-177-5569
Wheel Bolt
1.125 inches fastener length, hexagon head style, 0.156 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number MS9519-16 for national stock number 5306001775569.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-177-5569.
-
MPN or Model
MS9519-16
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.750 inches and 0.810 inches -
Fastener Length
1.125 inches -
Head Style
Hexagon -
Head Height
0.156 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.315 inches and 0.375 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Surface Finish
32.0 microinches threads -
Material
Steel comp 4037 -
Material Specification
Ams 6300 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Ams 2400 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-018-0337 MPN MS3103-16-11SCElectrical Receptacle Connector
- 5935-00-018-9393 MPN MS24264R22B12PNXElectrical Receptacle Connector
- 5935-00-044-4399 MPN MS24266R16T24PNElectrical Plug Connector
- 5940-00-082-5023 MPN MS18029-12S-3Terminal Board Cover
- 5935-00-162-1550 MPN MS27506A22-2Electrical Connector Cable Clamp
- 5935-00-184-7482 MPN MS3126P18-32PZElectrical Plug Connector
- 5935-00-189-1517 MPN MS3106A10S2PElectrical Plug Connector
- 5905-00-239-0583 MPN MS35043-222Composition Fixed Resistor
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-177-5569 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS9519-16 | Military Standards |