NSN 5306-00-180-0498
Close Tolerance Hex Head Bolt
0.828 inches fastener length, hexagon head style, between 0.203 inches and 0.235 inches head height, width between flats: between 0.553 inches and 0.565 inches .
Manufacturer part number AN176-6 for national stock number 5306001800498.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-180-0498.
-
MPN or Model
AN176-6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.640 inches -
Fastener Length
0.828 inches -
Head Style
Hexagon -
Head Height
Between 0.203 inches and 0.235 inches -
Width Between Flats
Between 0.553 inches and 0.565 inches -
Grip Diameter
Between 0.3737 inches and 0.3742 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole -
Thread Diameter
0.375 inches -
Grip Length
0.188 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.626 inches first hole -
Surface Finish
63.0 microinches grip -
Material
Steel comp 8740 or steel comp 8630 or steel comp 8735 or steel comp 4140 or steel comp 4130 or steel comp 4037 -
Material Specification
Mil-s-6049 military specification 1st material response or mil-s-6050 military specification 2nd material response or mil-s-6098 military specification 3rd material response or mil-s-5626 military specification 4th material response or mil-s-6758 military specification 5th material response or ams 6300 assn standard 6th material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 class 3 federal specification all treatment responses -
Thread Series Designator
Unf
More from these suppliers
- 5905-00-001-2822 MPN RNC70J4533BSFilm Fixed Resistor
- 5905-00-004-6024 MPN MILR39005-5Noninductive Wire Wound Fixed Resistor
- 5905-00-005-2690 MPN RNR50H7500FSFilm Fixed Resistor
- 5905-00-005-3145 MPN MIL-R-39007/9Inductive Wire Wound Fixed Resistor
- 5905-00-005-3545 MPN MIL-R-26/4Inductive Wire Wound Fixed Resistor
- 5935-00-005-8887 MPN M83723/08R1608NElectrical Plug Connector
- 5905-00-006-6941 MPN RNC60J4643BMFilm Fixed Resistor
- 5905-00-006-7201 MPN RNC60J2941FSFilm Fixed Resistor
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
![Mechanic Bill explains Close Tolerance Hex Head Bolt](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5306-00-180-0498 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN176-6 | Aeronautical Standards Group |
B6812 | Military Specifications |
Stock Check
![](/public/images/partscage_shelf3.png)