NSN 5306-00-180-1731
Wheel Bolt
Between 3.391 inches and 3.438 inches fastener length, hexagon head style, between 0.109 inches and 0.141 inches head height, width between flats: between 0.365 inches and 0.377 inches .
Manufacturer part number AN173-33 for national stock number 5306001801731.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-180-1731.
-
MPN or Model
AN173-33
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.406 inches -
Fastener Length
Between 3.391 inches and 3.438 inches -
Head Style
Hexagon -
Head Height
Between 0.109 inches and 0.141 inches -
Width Between Flats
Between 0.365 inches and 0.377 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole and 0.080 inches first hole -
Thread Diameter
0.190 inches -
Grip Length
Between 2.985 inches and 3.032 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
3.250 inches first hole and 3.281 inches first hole -
Material
Steel -
Surface Treatment
Cadmium and dichromate -
Thread Series Designator
Unf
More from these suppliers
- 5905-00-001-2873 MPN RW16VR22Inductive Wire Wound Fixed Resistor
- 5905-00-001-8519 MPN RNR70C4122FMFilm Fixed Resistor
- 5930-00-003-5739 MPN M3786/13-0043Rotary Switch
- 5930-00-004-0067 MPN MIL-S-3786/4Rotary Switch
- 5905-00-005-2698 MPN RNC55K8661FMFilm Fixed Resistor
- 5935-00-005-2855 MPN MILC83723-76Electrical Plug Connector
- 5905-00-005-2902 MPN RNC55H3012FSFilm Fixed Resistor
- 5905-00-005-8932 MPN RNR65H3011FSFilm Fixed Resistor
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-180-1731 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN173-33 | Aeronautical Standards Group |
B6812 | Military Specifications |