NSN 5306-00-180-2795
Close Tolerance Hex Head Bolt
4.594 inches fastener length, between 0.172 inches and 0.204 inches head height, 125000 pounds per square inch min. tensile strength (psi), material: steel comp 8740 or steel comp 8630 or steel comp 8735 or steel comp 4140 or steel comp 4130 or steel comp 4037 .
Manufacturer part number AN175-44A for national stock number 5306001802795.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-180-2795.
-
MPN or Model
AN175-44A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Length
0.532 inches -
Fastener Length
4.594 inches -
Head Height
Between 0.172 inches and 0.204 inches -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Material
Steel comp 8740 or steel comp 8630 or steel comp 8735 or steel comp 4140 or steel comp 4130 or steel comp 4037 -
Material Specification
Mil-s-6049 military specification 1st material response or mil-s-6050 military specification 2nd material response or mil-s-6098 military specification 3rd material response or mil-s-5626 military specification 4th material response or mil-s-6758 military specification 5th material response or ams 6300 assn standard 6th material response
More from these suppliers
- 5935-00-005-2837 MPN MILC83723-74Electrical Receptacle Connector
- 5905-00-006-6980 MPN RLR05C512JRFilm Fixed Resistor
- 5905-00-007-3866 MPN RBR55L17190BRNoninductive Wire Wound Fixed Resistor
- 5975-00-009-0173 MPN M81714-5-1Electronic Junction Rack
- 5905-00-009-9955 MPN RNC70H75R0FSFilm Fixed Resistor
- 5905-00-043-2054 MPN RN60G5760FFilm Fixed Resistor
- 5905-00-051-0146 MPN MILR22684-1Film Fixed Resistor
- 5905-00-051-8064 MPN RB08CE26101FNoninductive Wire Wound Fixed Resistor
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-180-2795 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN175-44A | Aeronautical Standards Group |
B6812 | Military Specifications |