NSN 5306-00-180-2798
Close Tolerance Hex Head Bolt
4.969 inches fastener length, between 0.172 inches and 0.204 inches head height, 125000 pounds per square inch min. tensile strength (psi), .
Manufacturer part number AN175-47A for national stock number 5306001802798.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-180-2798.
-
MPN or Model
AN175-47A
-
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Length
0.531 inches -
Fastener Length
4.969 inches -
Head Height
Between 0.172 inches and 0.204 inches -
Min. Tensile Strength (psi)
125000 pounds per square inch
More from these suppliers
- 5975-00-234-2422 MPN AN3061-8Electrical Box Connector
- 5935-00-259-0625 MPN AN3102A36-5PElectrical Receptacle Connector
- 5935-00-644-6849 MPN AN3108B32-13SElectrical Plug Connector
- 5930-00-655-1515 MPN AN3021-3Toggle Switch
- 4820-00-800-3572 MPN AN6287-1Pneumatic Tank Valve
- 5935-01-198-9937 MPN AN3106A24-11PElectrical Plug Connector
- 5935-01-257-8134 MPN AN3106A22-4PElectrical Plug Connector
- 5925-00-104-5761 MPN AN3160-50Circuit Breaker
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-180-2798 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN175-47A | Aeronautical Standards Group |