NSN 5306-00-180-3338
Close Tolerance Hex Head Bolt
Between 5.875 inches and 5.922 inches fastener length, hexagon head style, between 0.328 inches and 0.360 inches head height, width between flats: between 0.928 inches and 0.940 inches .
Manufacturer part number AN180-56 for national stock number 5306001803338.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-180-3338.
-
MPN or Model
AN180-56
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.921 inches and 1.000 inches -
Fastener Length
Between 5.875 inches and 5.922 inches -
Head Style
Hexagon -
Head Height
Between 0.328 inches and 0.360 inches -
Width Between Flats
Between 0.928 inches and 0.940 inches -
Grip Diameter
Between 0.6234 inches and 0.6240 inches -
Shank Unthreaded Hole Diameter
0.141 inches first hole and 0.151 inches first hole -
Thread Diameter
0.625 inches -
Grip Length
Between 4.922 inches and 4.954 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
5.656 inches first hole and 5.688 inches first hole -
Surface Finish
63.0 microinches grip -
Material
Steel comp 4140 or steel comp 8740 or steel comp 8740 or steel comp 8630 or steel comp 8735 or steel comp 4130 or steel comp 4037 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5985-00-093-5701 MPN AS333APAntenna
- 5940-00-229-7564 MPN AN5538-2Lug Terminal
- 5935-00-237-0679 MPN AN3108B18-1SElectrical Plug Connector
- 5935-00-622-2929 MPN AN3106B24-28SElectrical Plug Connector
- 5935-00-644-6973 MPN AN3106A16S8SXElectrical Plug Connector
- 5305-00-150-9754 MPN AN505-8-18Machine Screw
- 5305-00-151-0382 MPN AN500A6-18Machine Screw
- 5305-00-151-2599 MPN AN505-4-12Machine Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-180-3338 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN180-56 | Aeronautical Standards Group |