NSN 5306-00-182-1506
Close Tolerance Hex Head Bolt
2.531 inches fastener length, hexagon head style, between 0.390 inches and 0.422 inches head height, width between flats: between 1.053 inches and 1.066 inches .
Manufacturer part number AN182-23 for national stock number 5306001821506.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-182-1506.
-
MPN or Model
AN182-23
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.093 inches -
Fastener Length
2.531 inches -
Head Style
Hexagon -
Head Height
Between 0.390 inches and 0.422 inches -
Width Between Flats
Between 1.053 inches and 1.066 inches -
Grip Diameter
Between 0.7481 inches and 0.7488 inches -
Shank Unthreaded Hole Diameter
0.141 inches first hole -
Thread Diameter
0.750 inches -
Grip Length
1.438 inches -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.313 inches first hole -
Surface Finish
63.0 microinches grip -
Material
Steel comp 8740 or steel comp 8630 or steel comp 8735 or steel comp 4140 or steel comp 4037 or steel comp 1212 -
Material Specification
Mil-s-6049 military specification 1st material response or mil-s-6050 military specification 2nd material response or mil-s-6098 military specification 3rd material response or mil-s-5626 military specification 4th material response or ams 6300 assn standard 5th material response or qq-s-633 federal specification 6th material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 3 federal specification all treatment responses -
Thread Series Designator
Unf
More from these suppliers
- 5905-00-001-3031 MPN MIL-R-39008/5Composition Fixed Resistor
- 5905-00-001-7186 MPN MIL-PRF-22/4Nonprecision Wire Wound Variable Resistor
- 5935-00-004-0052 MPN M83723/01R2024NElectrical Receptacle Connector
- 5905-00-004-6127 MPN RNC60J1333FMFilm Fixed Resistor
- 5905-00-005-2711 MPN RWR74SR511FPInductive Wire Wound Fixed Resistor
- 5935-00-006-2936 MPN M28748/10H0DL1AElectrical Receptacle Connector
- 5905-00-006-5480 MPN M39015-02-006PMNonprecision Wire Wound Variable Resistor
- 5905-00-008-8320 MPN RNC60J1653BRFilm Fixed Resistor
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-182-1506 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN182-23 | Aeronautical Standards Group |
B6812 | Military Specifications |