NSN 5306-00-182-1853
Wheel Bolt
Between 0.516 inches and 0.562 inches fastener length, hexagon head style, between 0.109 inches and 0.141 inches head height, width between flats: between 0.365 inches and 0.377 inches .
Manufacturer part number AN3CH4A for national stock number 5306001821853.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-182-1853.
-
MPN or Model
AN3CH4A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.375 inches and 0.453 inches -
Fastener Length
Between 0.516 inches and 0.562 inches -
Head Style
Hexagon -
Head Height
Between 0.109 inches and 0.141 inches -
Width Between Flats
Between 0.365 inches and 0.377 inches -
Hole Diameter
0.046 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.109 inches and 0.141 inches -
Hole Quantity
1 -
Hole Type
Drilled -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Hole Configuration Style
Hexagon flats -
Material
Steel comp 431 -
Material Specification
Mil-s-18732 military specification single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5940-01-658-0448 MPN NAS1063Terminal Board Marker Strip
- 5305-00-007-6179 MPN NAS1100C04-9Machine Screw
- 5305-00-038-8396 MPN MS16208-136Hexagon Head Cap Screw
- 5305-00-053-8077 MPN MS24677-104Socket Head Cap Screw
- 5305-00-067-9864 MPN MS24667-3Socket Head Cap Screw
- 5305-00-068-5838 MPN MS24678-36Socket Head Cap Screw
- 5305-00-081-2651 MPN MS51038-15Setscrew
- 5305-00-166-3557 MPN NAS1352C3-14Socket Head Cap Screw
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-182-1853 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN3CH4A | Aeronautical Standards Group |
NASM3 THRU NASM20-AN3CH4A | National Aerospace Standards |