NSN 5306-00-182-1945
Wheel Bolt
Between 1.891 inches and 1.938 inches fastener length, hexagon head style, between 0.109 inches and 0.141 inches head height, width between flats: between 0.365 inches and 0.377 inches .
Manufacturer part number AN3CH17A for national stock number 5306001821945.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-182-1945.
-
MPN or Model
AN3CH17A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.375 inches and 0.453 inches -
Fastener Length
Between 1.891 inches and 1.938 inches -
Head Style
Hexagon -
Head Height
Between 0.109 inches and 0.141 inches -
Width Between Flats
Between 0.365 inches and 0.377 inches -
Hole Diameter
0.046 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 1.484 inches and 1.516 inches -
Hole Quantity
1 -
Hole Type
Drilled -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Hole Configuration Style
Hexagon flats -
Material
Steel comp 431 -
Material Specification
Mil-s-18732 military specification single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5905-00-001-7230 MPN RNC55C1373FSFilm Fixed Resistor
- 5905-00-004-6127 MPN RNR60J1333JMFilm Fixed Resistor
- 5905-00-005-2694 MPN RNR55J1541FSFilm Fixed Resistor
- 5905-00-005-2899 MPN MIL-R-55182/3Film Fixed Resistor
- 5935-00-008-4323 MPN M83723/82R22558Electrical Receptacle Connector
- 5905-00-009-2984 MPN MIL-R-55182/3Film Fixed Resistor
- 5905-00-042-9426 MPN MIL-R-93/15Noninductive Wire Wound Fixed Resistor
- 5905-00-051-9228 MPN MILR93Noninductive Wire Wound Fixed Resistor
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-182-1945 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN3CH17A | Aeronautical Standards Group |
B6812 | Military Specifications |