NSN 5306-00-182-9441
Coaxial Connector
Between 3.012 inches and 3.059 inches fastener length, double hexagon head style, 0.328 inches head height, width between flats: between 0.865 inches and 0.877 inches .
Manufacturer part number VS2521-9F39S for national stock number 5306001829441.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-182-9441.
-
MPN or Model
VS2521-9F39S
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.564 inches and 0.631 inches -
Fastener Length
Between 3.012 inches and 3.059 inches -
Head Style
Double hexagon -
Head Height
0.328 inches -
Width Between Flats
Between 0.865 inches and 0.877 inches -
Grip Diameter
Between 0.5607 inches and 0.5616 inches -
Shank Unthreaded Hole Diameter
0.141 inches first hole -
Thread Diameter
0.562 inches -
Grip Length
Between 2.428 inches and 2.448 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.893 inches first hole and 2.925 inches first hole -
Material
Steel -
Material Specification
Sps-m-107, standard pressed steel co mfr ref single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-01-575-2579 MPN 3M943E5-5-6Headle Shoulder Pin
- 5305-00-242-4784 MPN AIC812-04-9Machine Screw
- 5305-00-246-7449 MPN AIC1024V3-3Close Tolerance Screw
- 5305-00-263-8708 MPN C792-4-14Close Tolerance Screw
- 5305-00-469-3784 MPN AIC792-3-13Close Tolerance Screw
- 5305-00-487-5261 MPN AIC1023V4-20Close Tolerance Screw
- 5305-00-505-2744 MPN AIC1186-508Close Tolerance Screw
- 5305-00-834-0129 MPN 53B333-3Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-182-9441 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VS2521-9F39S | Arconic Global Fasteners & Rings, |
C699-9-39 | Lockheed Martin Corporation |
AIC220-9-39 | Sps Technologies, Llc |
EWSB22-9-39 | Sps Technologies, Llc |
EWSB22-9-39 | Sps Technologies, Llc |
VS2521-9F39S | Alcoa Global Fasteners, Inc. |
C699-9-39 | Alcoa Global Fasteners, Inc. |