NSN 5306-00-187-9018
Coaxial Connector
Between 1.317 inches and 1.347 inches fastener length, double hexagon w/hole head style, 0.405 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number EWB26-6-10 for national stock number 5306001879018.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-187-9018.
-
MPN or Model
EWB26-6-10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.682 inches and 0.732 inches -
Fastener Length
Between 1.317 inches and 1.347 inches -
Head Style
Double hexagon w/hole -
Head Height
0.405 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Extended Washer Diameter
Between 0.715 inches and 0.725 inches -
Extended Washer Thickness
0.075 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Thread Diameter
0.375 inches -
Grip Length
Between 0.615 inches and 0.635 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
260000 pounds per square inch -
Hardness Rating
51.0 rockwell c and 54.0 rockwell c -
Material
Steel comp h11 -
Material Specification
Ams 6485 assn standard single material response or ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Mil-c-8837. type 1, cl 2 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-310-6083 MPN AIC813-08R16Machine Screw
- 5305-00-456-2431 MPN AIC813-5-R23Machine Screw
- 5305-00-459-0885 MPN AIC84-3-9Machine Screw
- 5305-00-809-3053 MPN 51B221-15HMachine Screw
- 5305-01-025-6960 MPN HT4049-4D11Close Tolerance Screw
- 5305-01-056-4220 MPN 986-10-52Close Tolerance Screw
- 5305-01-211-7485 MPN AIC4040-3-02RClose Tolerance Screw
- 5305-01-266-8382 MPN LD111-0044-2417Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-187-9018 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
EWB26-6-10 | Huck International, Inc. |
C305-6-10 | Lockheed Martin Corporation |
VS2005-6-10 | Arconic Global Fasteners & Rings, |
AIC260E-6-10 | Sps Technologies, Llc |
PBF26T6-10 | Sps Technologies, Llc |
EWB26-6-10 | Huck Intl Inc |
VS2005-6-10 | Alcoa Global Fasteners, Inc. |