NSN 5306-00-193-1041
Coaxial Connector
Between 1.402 inches and 1.449 inches fastener length, double hexagon head style, 0.164 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number EWSB930-4-18 for national stock number 5306001931041.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-193-1041.
-
MPN or Model
EWSB930-4-18
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.267 inches and 0.334 inches -
Fastener Length
Between 1.402 inches and 1.449 inches -
Head Style
Double hexagon -
Head Height
0.164 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 1.115 inches and 1.135 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
300000 pounds per square inch -
Hardness Rating
55.0 rockwell c and 58.0 rockwell c -
Material
Steel -
Surface Treatment
Nickel and cadmium -
Surface Treatment Specification
Ams 2416 assn standard all treatment responses -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-316-7741 MPN AIC812-6-7Machine Screw
- 5305-00-505-2833 MPN LS15267V3-34Machine Screw
- 5305-00-806-7974 MPN SK2015-155Machine Screw
- 5305-01-025-4364 MPN AIC813-08R12Machine Screw
- 5305-01-084-5394 MPN NAS1101E08-12Machine Screw
- 5305-01-329-9958 MPN AIC4414-3-25Machine Screw
- 5305-01-435-8691 MPN BACB30LU9-56Close Tolerance Screw
- 5305-01-440-6672 MPN AIC1703-3-6Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-193-1041 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
EWSB930-4-18 | Sps Technologies, Llc |
AIC930-4-18 | Sps Technologies, Llc |
VS2767-4C18 | Alcoa Global Fasteners, Inc. |
C078-4-18 | Lockheed Martin Corporation |