NSN 5306-00-195-2307
Wheel Bolt
2.000 inches fastener length, double hexagon w/hole head style, 0.330 inches head height, width between flats: between 0.304 inches and 0.313 inches .
Manufacturer part number MS21280-28 for national stock number 5306001952307.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-195-2307.
-
MPN or Model
MS21280-28
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.750 inches and 0.810 inches -
Fastener Length
2.000 inches -
Head Style
Double hexagon w/hole -
Head Height
0.330 inches -
Width Between Flats
Between 0.304 inches and 0.313 inches -
Extended Washer Diameter
0.438 inches -
Extended Washer Thickness
Between 0.060 inches and 0.070 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 1.190 inches and 1.250 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
130000 pounds per square inch -
Hardness Rating
248.0 brinell standard and 341.0 brinell standard -
Minimum Yield Strength
85000 pounds per square inch -
Surface Finish
63.0 microinches grip -
Material
Iron alloy 660 -
Material Specification
Ams 5737 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5950-00-111-8343 MPN MS90538-13Radio Frequency Coil
- 5940-00-113-3148 MPN MS20659-164Lug Terminal
- 5905-00-141-0727 MPN RCR20G201JRComposition Fixed Resistor
- 5935-00-228-6243 MPN MS27294-1Electrical Connector Cover
- 5905-00-279-4587 MPN MS35350-149Composition Fixed Resistor
- 5935-00-283-3727 MPN MS3106E14S5PElectrical Plug Connector
- 5935-00-283-7117 MPN MS3106B20-7SWElectrical Plug Connector
- 5935-00-328-3582 MPN MS27497T16S26PElectrical Receptacle Connector
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-195-2307 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21280-28 | Military Standards |
MS9557-28 | Military Standards |