NSN 5306-00-202-0114
Close Tolerance Hex Head Bolt
Impedance locking element in shank.
Manufacturer part number 106467-3-17 for national stock number 5306002020114.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-202-0114.
-
MPN or Model
106467-3-17
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.357 inches and 0.393 inches -
Fastener Length
Between 1.435 inches and 1.455 inches -
Head Style
Dished hexagon -
Head Height
Between 0.095 inches and 0.110 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Grip Diameter
Between 0.1885 inches and 0.1894 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 1.062 inches and 1.078 inches -
Thready Qty Per Inch (tpi)
31 -
Min. Tensile Strength (psi)
95000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 41.0 rockwell c -
Surface Finish
63.0 microinches grip -
Material
Steel comp 4140 or steel comp 8740 or steel comp 4130 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 2 federal specification all treatment responses -
Thread Series Designator
Unjf
More from these suppliers
- 1680-01-328-4789 MPN HD11006-102Lru Holder Clamp Assembly
- 5305-00-432-4386 MPN CA2820B11SPanel Screw Assembly
- 5940-00-833-5836 MPN NAS1063A2-803Terminal Board Marker Strip
- 5905-01-067-0847 MPN M8340102M4701GBFilm Fixed Resistor Network
- 5905-01-174-8472 MPN RWR81S34R8FPInductive Wire Wound Fixed Resistor
- 5940-01-470-3349 MPN NAS1063A20-500BFTerminal Board Marker Strip
- 5935-01-597-0337 MPN E0762F15-04LSpec Backshell
- 5305-00-007-0281 MPN NAS1100E08-8PMachine Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-202-0114 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
106467-3-17 | Sps Technologies, Llc |
AS194-3-17 | Avibank Mfg., Inc. |
MS27576-3-17 | National Aerospace Standards |
MS27576-3-17 | Military Standards |
CA4510-3-17 | Arconic Global Fasteners & Rings, |