NSN 5306-00-202-0245
Close Tolerance Hex Head Bolt
Retaining element in shank.
Manufacturer part number 106467-4-14H for national stock number 5306002020245.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-202-0245.
-
MPN or Model
106467-4-14H
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.211 inches and 0.262 inches -
Fastener Length
Between 1.293 inches and 1.313 inches -
Head Style
Dished hexagon -
Head Height
Between 0.126 inches and 0.141 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Hole Diameter
0.045 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Thread Diameter
0.250 inches -
Grip Length
Between 0.875 inches and 0.891 inches -
Hole Quantity
3 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
95000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 41.0 rockwell c -
Hole Configuration Style
Hexagon flats -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.193 inches first hole and 1.223 inches first hole -
Surface Finish
63.0 microinches grip -
Material
Steel -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 3 federal specification all treatment responses -
Thread Series Designator
Unjf
More from these suppliers
- 1560-01-556-4285 MPN C161-3-1-8415Aircraft Channel
- 5305-00-067-7808 MPN SFH22D6A10Machine Screw
- 5305-00-232-1035 MPN 110148-4-6Close Tolerance Screw
- 5305-00-754-3058 MPN NAS1203-10Close Tolerance Screw
- 5305-00-899-2720 MPN NAS1189-5P12WSocket Head Cap Screw
- 5305-01-025-6430 MPN 12705-6C32DShoulder Screw
- 5305-01-028-2470 MPN HT4020-4-6AClose Tolerance Screw
- 5305-01-067-5838 MPN C7984-3-17Close Tolerance Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-202-0245 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
106467-4-14H | Sps Technologies, Llc |