NSN 5306-00-202-1752
Coaxial Connector
Between 1.222 inches and 1.252 inches fastener length, dished hexagon head style, between 0.125 inches and 0.140 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number NAS6604-13 for national stock number 5306002021752.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-202-1752.
-
MPN or Model
NAS6604-13
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.400 inches and 0.450 inches -
Fastener Length
Between 1.222 inches and 1.252 inches -
Head Style
Dished hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.802 inches and 0.822 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel comp e4340 or steel comp 4340 or steel comp 8740 or steel comp 8640 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas6604 professional/industrial association standard
More from these suppliers
- 1560-00-046-1835 MPN 11878-11Exhaust Muffler
- 5985-00-984-1621 MPN 124R355-1Antenna Element
- 1560-01-310-2134 MPN 124N380-11Fuselage Section
- 5930-01-507-6414 MPN 3671224E790-3Electronic Switch
- 1560-01-525-2480 MPN 3671250E08001-5M Actuator Assembly
- 1560-01-537-0453 MPN 3671235W960-6Aircraft Structural Panel
- 1680-01-669-0321 MPN B001272F01021-3Radome Cap
- 5320-00-754-0822 MPN 17-615-00-505Solid Rivet
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-202-1752 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6604-13 | National Aerospace Standards |
BACB30NE4-13 | The Boeing Company |
BACB30NF4-13 | The Boeing Company |
NAS6604-13 | Northrop Grumman Systems Corporation |
NAS6604-13 | Sikorsky Aircraft Corporation |