NSN 5306-00-207-1665
Close Tolerance Hex Head Bolt
Between 2.078 inches and 2.125 inches fastener length, hexagon head style, between 0.172 inches and 0.204 inches head height, width between flats: between 0.490 inches and 0.502 inches .
Manufacturer part number AN175H20 for national stock number 5306002071665.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-207-1665.
-
MPN or Model
AN175H20
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.500 inches and 0.579 inches -
Fastener Length
Between 2.078 inches and 2.125 inches -
Head Style
Hexagon -
Head Height
Between 0.172 inches and 0.204 inches -
Width Between Flats
Between 0.490 inches and 0.502 inches -
Hole Diameter
0.076 inches -
Grip Diameter
Between 0.3112 inches and 0.3117 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole -
Thread Diameter
0.312 inches -
Grip Length
Between 1.546 inches and 1.578 inches -
Hole Quantity
1 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Hole Configuration Style
Hexagon flats -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.905 inches first hole and 1.937 inches first hole -
Surface Finish
63.0 microinches grip -
Material
Steel comp 8740 or steel comp 8630 or steel comp 8735 or steel comp 4037 or steel comp 4140 or steel comp 4130 -
Material Specification
Mil-s-6049 military specification 1st material response or mil-s-6050 military specification 2nd material response or mil-s-6098 military specification 3rd material response or ams 6300 assn standard 4th material response or mil-s-5626 military specification 5th material response or mil-s-6758 military specification 6th material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 3 federal specification all treatment responses -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-149-3425 MPN AN3102A22-2PElectrical Receptacle Connector
- 5935-00-501-5107 MPN AN3106M20-11SElectrical Plug Connector
- 5935-00-665-4670 MPN AN3107A20-15SElectrical Plug Connector
- 5935-01-259-4854 MPN AN3106A24-7SWElectrical Plug Connector
- 5975-01-428-6574 MPN AN3420-8Electrical Conductor Bushing
- 5305-00-144-3754 MPN AN515-10R5Machine Screw
- 5305-00-150-9789 MPN AN505-5-5Machine Screw
- 5305-00-151-0086 MPN AN520-4-24Machine Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-207-1665 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN175H20 | Aeronautical Standards Group |