NSN 5306-00-207-2309
Coaxial Connector
1.406 inches fastener length, hexagon head style, 0.094 inches head height, width between flats: 0.375 inches .
Manufacturer part number NAS464-3-17 for national stock number 5306002072309.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-207-2309.
-
MPN or Model
NAS464-3-17
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.344 inches -
Fastener Length
1.406 inches -
Head Style
Hexagon -
Head Height
0.094 inches -
Width Between Flats
0.375 inches -
Grip Diameter
Between 0.1889 inches and 0.1894 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole -
Thread Diameter
0.190 inches -
Grip Length
1.062 inches -
Thready Qty Per Inch (tpi)
32 -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.250 inches first hole -
Material
Steel -
Thread Series Designator
Unf
More from these suppliers
- 5940-01-381-7092 MPN NAS1063B226-235Terminal Board Marker Strip
- 5305-00-007-6172 MPN NAS1100E00-4Machine Screw
- 5305-00-008-5914 MPN NAS1100E06-28Machine Screw
- 5305-00-058-4101 MPN NAS608C3H8Socket Head Cap Screw
- 5305-00-082-0580 MPN NAS1634-27Machine Screw
- 5305-00-089-0268 MPN NAS1352-04-8PSocket Head Cap Screw
- 5305-00-116-1663 MPN NAS1101-6-16Machine Screw
- 5305-00-415-2188 MPN MS16996-22BSocket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-207-2309 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS464-3-17 | National Aerospace Standards |