NSN 5306-00-207-4252
Shouldered Rivet Ring Bolt
About this product
Between 0.247 inches and 0.255 inches eye inside diameter, 0.094 inches shoulder thickness, between 1.329 inches and 1.374 inches shank length, eye stock thickness: between 0.183 inches and 0.193 inches .
Manufacturer part number 725572 for national stock number 5306002074252.
Datasheet
-
Product description
Eye Bolt NSN 5306-00-207-4252.
-
MPN or Model
725572
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.526 inches and 0.551 inches -
Eye Inside Diameter
Between 0.247 inches and 0.255 inches -
Shoulder Thickness
0.094 inches -
Shank Length
Between 1.329 inches and 1.374 inches -
Eye Stock Thickness
Between 0.183 inches and 0.193 inches -
Shoulder Diameter
Between 0.600 inches and 0.615 inches -
Shank Unthreaded Hole Diameter
0.089 inches first hole and 0.092 inches first hole -
Overall Length
Between 2.219 inches and 2.264 inches -
Thread Diameter
0.312 inches -
Thready Qty Per Inch (tpi)
24 -
Distance From Center Of Eye To Shank End
1.916 inches -
Distance From Threaded End To Shank Hole Center
1.172 inches first hole -
Eye Outside Width
Between 0.600 inches and 0.615 inches -
Material
Steel comp 8740 -
Material Specification
Mil-s-6049, condition c4 military specification single material response -
Style Designator
Round, closed w/shoulder -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-012-8028 MPN 3W12016-102Fairing Panel Assembly
- 1560-00-034-7619 MPN 791390-2Pylon Tube Assembly
- 1560-00-055-6862 MPN 785751-1Forward Canop Plate
- 1680-00-072-7857 MPN 3F31012-102Bell Crank
- 1560-00-076-4849 MPN 3A97016-103Bleed Air Duct Assembly
- 1560-00-098-7955 MPN 342122-7RAircraft Access Cover
- 4920-00-108-1671 MPN 4S95061-101ATest Block Adapter
- 1560-00-119-7266 MPN EEP087-166Radome Tee
Eye Bolt
An externally threaded device whose threaded portion is of one nominal diameter, without a head, but with the unthreaded end either bent more than 225 degrees (3.925 radians) or cast, forged, or punched to resemble an eye. See also bolt, hook. Excludes connector, rod end.
Pricing and Availability
Get a quote for 5306-00-207-4252 eye boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
725572 | Lockheed Martin Corporation |
Stock Check
Availability of this NSN has not been updated recently. Submit
the pricing and availbility form above to receive an up to date quote.