NSN 5306-00-207-5429
Shouldered Rivet Ring Bolt
About this product
Between 0.375 inches and 0.378 inches eye inside diameter, 0.094 inches shoulder thickness, between 1.062 inches and 1.109 inches shank length, eye stock thickness: between 0.183 inches and 0.193 inches .
Manufacturer part number AN46-10 for national stock number 5306002075429.
Datasheet
-
Product description
Eye Bolt NSN 5306-00-207-5429.
-
MPN or Model
AN46-10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.624 inches and 0.671 inches -
Eye Inside Diameter
Between 0.375 inches and 0.378 inches -
Shoulder Thickness
0.094 inches -
Shank Length
Between 1.062 inches and 1.109 inches -
Eye Stock Thickness
Between 0.183 inches and 0.193 inches -
Shoulder Diameter
0.750 inches -
Shank Unthreaded Hole Diameter
0.096 inches first hole and 0.116 inches first hole -
Overall Length
2.094 inches -
Thread Diameter
0.375 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 33.0 rockwell c -
Distance From Center Of Eye To Shank End
1.671 inches -
Distance From Threaded End To Shank Hole Center
0.859 inches first hole and 0.891 inches first hole -
Eye Outside Width
0.750 inches -
Material
Steel comp 4140 or steel comp 8740 or steel comp 8630 or steel comp 8735 or steel comp 4130 or steel comp 4037 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Style Designator
Round, closed w/shoulder -
Thread Series Designator
Unf
More from these suppliers
- 5935-01-028-0414 MPN NAS1653R18B32PNElectrical Plug Connector
- 5935-01-591-8613 MPN AS85049/38-13WElectrical Connector Backshell
- 5940-01-657-2412 MPN NAS1063B1-03Terminal Board Marker Strip
- 5305-00-004-5069 MPN MS27039-5-17Machine Screw
- 5305-00-162-4066 MPN NAS1221-08-6PMachine Screw
- 5305-00-269-3227 MPN MS90725-77Hexagon Head Cap Screw
- 5305-00-269-4217 MPN MS24694S159Machine Screw
- 5305-00-324-9018 MPN NAS589-16Close Tolerance Screw
Eye Bolt
An externally threaded device whose threaded portion is of one nominal diameter, without a head, but with the unthreaded end either bent more than 225 degrees (3.925 radians) or cast, forged, or punched to resemble an eye. See also bolt, hook. Excludes connector, rod end.
Pricing and Availability
Get a quote for 5306-00-207-5429 eye boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN46-10 | National Aerospace Standards |
AN46-10 | Aeronautical Standards Group |
Stock Check
Availability for this item was last checked on 10/30/23.
The quantities and conditions available at the time were:
- NE: 472
- NS: 14