NSN 5306-00-207-8500
Coaxial Connector
2.000 inches fastener length, 1.000 inches head diameter, 0.188 inches head height, width between flats: 0.936 inches .
Manufacturer part number 760795 for national stock number 5306002078500.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-207-8500.
-
MPN or Model
760795
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.375 inches -
Fastener Length
2.000 inches -
Head Diameter
1.000 inches -
Head Height
0.188 inches -
Width Between Flats
0.936 inches -
Grip Diameter
0.4371 inches -
Shank Unthreaded Hole Diameter
0.110 inches first hole -
Thread Diameter
0.375 inches -
Grip Length
1.625 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.852 inches first hole -
Material
Steel comp e4340 or steel comp 4340 -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-008-9492 MPN 4F50154-124AAircraft Floor
- 1560-00-014-4206 MPN 762873-5Drag Chute Bracket
- 1560-00-019-2711 MPN 3T53002-105Elev Strip Weight
- 4820-00-031-5585 MPN 633762-4Check Valve
- 1560-00-034-4095 MPN 904137-101Handle Assembly
- 1560-00-055-6818 MPN 769801-113Ygen Su O Tube Assy
- 1560-00-081-6997 MPN 4T12105-101AVertical Stabilizer Panel
- 1560-00-099-2641 MPN 174665-13RAircraft Access Door
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-207-8500 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
760795 | Lockheed Martin Corporation |