NSN 5306-00-207-9698
Wheel Bolt
Between 0.810 inches and 0.860 inches fastener length, hexagon head style, 0.280 inches head height, width between flats: between 0.553 inches and 0.565 inches .
Manufacturer part number 520883 for national stock number 5306002079698.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-207-9698.
-
MPN or Model
520883
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.700 inches and 0.720 inches -
Fastener Length
Between 0.810 inches and 0.860 inches -
Head Style
Hexagon -
Head Height
0.280 inches -
Width Between Flats
Between 0.553 inches and 0.565 inches -
Hole Diameter
0.062 inches -
Thread Diameter
0.375 inches -
Hole Quantity
6 -
Hole Type
Drilled -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
24 -
Hardness Rating
32.0 rockwell c and 36.0 rockwell c -
Hole Configuration Style
Hexagon longitudinal hole -
Material
Steel comp 8640 -
Material Specification
Qq-s-624 federal specification single material response -
Surface Treatment
Cadmium or zinc -
Thread Series Designator
Unf
More from these suppliers
- 5305-01-416-8195 MPN 26-0501-28Hexagon Head Cap Screw
- 4820-00-436-3182 MPN 11647114Fluid Pressure Regulating Valve
- 5935-00-562-0006 MPN 8376468Elec Plug Connector
- 4820-00-678-7292 MPN 5385541Cock Assy
- 4820-00-741-4443 MPN 7414443Valve Disk
- 5950-00-753-9451 MPN 7539451Electrical Coil
- 4820-00-908-6324 MPN 10947157Calibrated Flow Valve
- 5975-01-054-9769 MPN 11646104Electrical Wall Plate
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-207-9698 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
520883 | L3 Technologies, Inc. |
8691905 | U S Army Tank Automotive Command |