NSN 5306-00-208-0243
Coaxial Connector
0.988 inches fastener length, hexagon head style, 0.125 inches head height, width between flats: 0.437 inches .
Manufacturer part number 760793 for national stock number 5306002080243.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-208-0243.
-
MPN or Model
760793
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.348 inches and 0.358 inches -
Fastener Length
0.988 inches -
Head Style
Hexagon -
Head Height
0.125 inches -
Width Between Flats
0.437 inches -
Grip Diameter
Between 0.2800 inches and 0.2808 inches -
Shank Unthreaded Hole Diameter
0.075 inches first hole and 0.080 inches first hole -
Thread Diameter
0.250 inches -
Grip Length
Between 2.615 inches and 2.635 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
260000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.848 inches first hole -
Material
Steel comp e4340 or steel comp 4340 -
Surface Treatment
Chromium -
Surface Treatment Specification
Ty2, fscm 36659 mfr ref single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-003-9692 MPN 4P33179-104BAircraft Structural Plate
- 1560-00-009-9533 MPN 4F77188-602AFixed Rib Fitting
- 1560-00-014-4116 MPN 762785-4Drag Chute Bracket
- 1560-00-015-4919 MPN 3W23326-102Flap Panel Assembly
- 1560-00-022-8780 MPN 784868-17Emerg Tube Assembly
- 5940-00-023-8658 MPN LS7007-6-7Terminal Board Cover
- 1560-00-074-3717 MPN 762303-35Press Tube Assembly
- 1560-00-077-0156 MPN 3P21707-101Cowl Latch Fitting
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-208-0243 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
760793 | Lockheed Martin Corporation |