1-321-802-5889

NSN 5306-00-209-3393

Close Tolerance Hex Head Bolt

About this product

Between 1.203 inches and 1.250 inches fastener length, hexagon head style, between 0.172 inches and 0.204 inches head height, width between flats: between 0.490 inches and 0.502 inches .

Manufacturer part number AN175C11A for national stock number 5306002093393.

Datasheet

  • Product description

    Close Tolerance Bolt NSN 5306-00-209-3393.

  • MPN or Model

    AN175C11A

  • Schedule B
    7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment)
  • NMF (National Motor Freight)
    093486 - Bolts, Nuts Or Screws, NOI (sub 3)
  • Thread Class
    3a
  • Thread Direction
    Right-hand
  • Thread Length
    Between 0.499 inches and 0.578 inches
  • Fastener Length
    Between 1.203 inches and 1.250 inches
  • Head Style
    Hexagon
  • Head Height
    Between 0.172 inches and 0.204 inches
  • Width Between Flats
    Between 0.490 inches and 0.502 inches
  • Grip Diameter
    Between 0.3112 inches and 0.3117 inches
  • End Application
    Spec item
  • Thread Diameter
    0.312 inches
  • Grip Length
    Between 0.672 inches and 0.704 inches
  • Thready Qty Per Inch (tpi)
    24
  • Min. Tensile Strength (psi)
    125000 pounds per square inch
  • Hardness Rating
    26.0 rockwell c and 32.0 rockwell c
  • Surface Finish
    63.0 microinches grip
  • Material
    Steel comp 431
  • Material Specification
    Mil-s-18732 military specification single material response
  • Surface Treatment
    Passivate
  • Thread Series Designator
    Unf
More from these suppliers
Close Tolerance Bolt

An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.

Mechanic Bill explains Close Tolerance Hex Head Bolt

Pricing and Availability

Get a quote for 5306-00-209-3393 close tolerance bolt
Quantity:
Your Email:
Your Name:
Company Name:
Optional reference:
Phone:
NSN 5306002093393

We do not share, sell, or distribute your information to any third party.
Privacy | Terms

All major credit cards accepted as well as gov. p-cards
Manufacturer Part Numbers and Alternates
MPN manufacturer part number Registrant or Supplier
AN175C11A Air Force-navy Aeronautical
AN175C11A Air Force-navy Aeronautical
Stock Check
Availability of this NSN has not been updated recently. Submit the pricing and availbility form above to receive an up to date quote.