NSN 5306-00-225-3040
Close Tolerance Hex Head Bolt
1.094 inches fastener length, double hexagon w/hole head style, 0.260 inches head height, width between flats: between 0.243 inches and 0.251 inches .
Manufacturer part number MS9110-11 for national stock number 5306002253040.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-225-3040.
-
MPN or Model
MS9110-11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.459 inches and 0.532 inches -
Fastener Length
1.094 inches -
Head Style
Double hexagon w/hole -
Head Height
0.260 inches -
Width Between Flats
Between 0.243 inches and 0.251 inches -
Extended Washer Diameter
0.375 inches -
Extended Washer Thickness
Between 0.040 inches and 0.050 inches -
Grip Diameter
Between 0.1894 inches and 0.1899 inches -
Thread Diameter
0.192 inches -
Grip Length
0.635 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
130000 pounds per square inch -
Hardness Rating
248.0 brinell standard and 341.0 brinell standard -
Minimum Yield Strength
85000 pounds per square inch -
Surface Finish
32.0 microinches bearing surface of head -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-01-184-3333 MPN M85049/74-18-1Electrical Connector Potting Mold
- 5935-01-025-2131 MPN MS3406D20-27SWElectrical Plug Connector
- 5930-01-040-6270 MPN AS55941/1Toggle Switch
- 5935-01-093-5817 MPN MS3406DJ-17E8EElectrical Plug Connector
- 5935-01-109-6077 MPN MS3108B18-1SYElectrical Plug Connector
- 5935-01-205-1791 MPN MS3406DJ28D21SElectrical Plug Connector
- 5935-01-206-3554 MPN SAE AS85049/11Electrical Connector Backshell
- 5935-01-241-5934 MPN MS3450W14S-1SElectrical Receptacle Connector
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-225-3040 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS9110-11 | Society Of Automotive Engineers Inc |
MS9110-11 | Military Standards |
MS9110-11 | Sae International |